Skip to content
208-414-1302

Emergency Service Available!

Trane Multi-Zone Ductless Systems

Trane.

A multi-zone (also called a multi-split) ductless system connects an outdoor unit to an one or more indoor units, letting you control the temperature in several different zones of your home. Variable Refrigerant Flow (VRF) systems are a type of multi-zone ductless systems. VRF systems are energy efficient, and they can be used to heat one zone while cooling a different zone at the same time.

Trane Ceiling Suspended Ductless System Unit.

Ceiling Suspended Unit

For specialty applications, ceiling suspended options are available that are feature crisp, modern styling and include easy-to-clean filters and wireless remote controls.

  • For ductless applications where ceiling and wall mount (6" clearance from the floor), the 4TVX is the solution for you.
  • Unit has ability to accept VRF wired or wireless controls.
  • Available in 18000 or 24000 BTUH (nominal capacity)

^ Back to Top

Trane High Wall Unit.

High Wall Unit

For specialty applications, high wall options are available that are feature crisp, modern styling and include easy-to-clean filters and wireless remote controls.

  • For ductless applications where high wall mounting is required (with 12" clearance from the ceiling), the 4TVW is the solution for you.
  • Unit has ability to accept VRF wired or wireless controls.
  • Available in 7500 to 24000 BTUH (nominal capacity).

^ Back to Top

Trane Four-Way Cassette.

Four-Way Cassette

These units offer stylish panel designs with strong airflow and quiet operation. Lightweight for easier installation, each unit has an internal condensate pump with integral check valve and optional fresh air intake.

  • Ideal indoor unit for larger square rooms.
  • Offers capacity ranges from 9000 BTUH to 48000 BTUH (nominal capacity).
  • Cassette panel includes infrared receiver, allowing for convenient wireless control or your VRF system.

^ Back to Top

Trane 4MXW8 Multi-Split Indoor System.

4MXW8

This indoor ductless heating and cooling unit works as part of a ductless mini-split or multi-split system. Mounted on the wall, this ductless unit offers flexible, high-efficiency heating and cooling for precise comfort without the ductwork.

Ductless System

Composed of three main components—an indoor unit consisting of a coil and a fan, an outdoor compressor unit and a remote control—most ductless heating and cooling split systems are connected by refrigerant lines and require no ductwork. The indoor unit can be mounted on the wall or in the ceiling.

Efficient Comfort

Trane’s ductless heating and cooling systems have Seasonal Energy Efficiency Ratings (SEER) ranging from 16.00 to 22.00, making the systems remarkably efficient and environmentally friendly.

Design Flexibility

Since there is no ductwork to install, it’s easy to add Trane’s ductless heating and cooling units to any home, in any room desired. It’s an economical and efficient option for homes without an existing ducted system or when adding ductwork may be impractical or too expensive.

Zone Control

With a multi-split system, between two and five indoor units—depending on the indoor model—can be connected to just one outdoor unit, providing the exact degree of comfort you require room to room or zone by zone.

^ Back to Top

Trane Mini Four-Way Cassette.

Mini Four-Way Cassette

These units offer stylish panel designs with strong airflow and quiet operation. Lightweight for easier installation, each unit has an internal condensate pump with integral check valve and optional fresh air intake.

  • Excellent solution for square rooms and can be installing in a 2' X 2' opening. Conditioned air is supplied in four directions and returned through the bottom of the panel.
  • Designed to accept wired and/or wireless controls. Available in nominal capacity ranging from 9000 to 20000 BTUH.

^ Back to Top

Trane 4MXD8 Multi-Split Indoor System.

4MXD8

Our heating and ductless air conditioner system works as part of a multi-split unit. This ductless heating and cooling system offers flexible mounting options and versatile, high-efficiency heating and cooling for precise comfort with minimum ductwork.

Ductless System

Composed of three main components—an indoor unit consisting of a coil and a fan, an outdoor compressor unit and a remote control—most ductless A/C and heating units are connected by refrigerant lines and require minimum ductwork. This heating and ductless air conditioner system can be mounted on the wall or in the ceiling.

Efficient Comfort

Trane’s ductless A/C and heating units have Seasonal Energy Efficiency Ratings (SEER) ranging from 16.00 to 22.00, making our ductless heating and cooling systems remarkably efficient and environmentally friendly.

Quiet Operation

Specially designed air vents efficiently reduce sound to provide quiet comfort as low as 26db, for whisper-quiet operation.

Design Flexibility

Since there is minimum ductwork to install, it’s easy to add Trane’s reliable ductless heating and cooling to any home, in any room desired. It’s an economical and efficient option for homes without an existing ducted system or when adding extensive ductwork may be impractical or too expensive.

^ Back to Top

Trane Slim One-Way Cassette.

Slim One-Way Cassette

These units offer stylish panel designs with strong airflow and quiet operation. Lightweight for easier installation, each unit has an internal condensate pump with integral check valve and optional fresh air intake.

  • Ideal for small, narrow conference rooms, hallways, and add-on rooms. We offer a traditional cassette and a sliding panel.
  • Designed to accept wired and/or wireless controls. Available in nominal capacity ranges from 7500 to 12000 BTUH.

^ Back to Top

Trane 4MXC8 Multi-Split Indoor System.

4MXC8

This indoor unit works as part of a multi split system. Our selection of Trane multi-split systems are mounted to the ceiling and offer versatile and high-efficiency heating and cooling for precise comfort with minimum ductwork.

Ductless System

Composed of three main components—an indoor unit consisting of a coil and a fan, an outdoor compressor unit and a remote control—most ductless multi-split systems are connected by refrigerant lines and require minimum ductwork. The indoor unit can be mounted on the wall or in the ceiling.

Efficient Comfort

Trane’s ductless multi-split systems have Seasonal Energy Efficiency Ratings (SEER) ranging from 16.00 to 22.00, making the systems remarkably efficient and environmentally friendly.

Quiet Operation

Each Trane multi-split system has specially designed air vents that efficiently reduce sound to provide quiet comfort as low as 26db, for whisper-quiet operation.

Design Flexibility

Since there is minimum ductwork to install, it’s easy to add Trane’s reliable heating and cooling to any home, in any room desired. Ductless multi-split systems are an economical and efficient option for homes without an existing ducted system or when adding extensive ductwork may be impractical or too expensive.

^ Back to Top

Trane Mid Static Pressure Duct.

Middle Static Pressure Duct

These compact units are easy to install. Internal drain pumps are factory installed. These models can be ducted to supply conditioned air to multiple rooms.

  • Designed for single and multi room residential applications with higher static needs than the slim ducted product.
  • Ships with an internal drain pump standard . Capacity ranges from 7500 BTUH to 48000 BTUH (nominal capacity).

^ Back to Top

Trane 4TXM22 Multi-Split Outdoor System.

4TXM22

Working as part of a ductless heating and cooling system, this outdoor heat pump can be connected to work with two to five ductless heating and cooling units, depending on the model, allowing you to operate each zone independently for room-by-room precise comfort.

Ductless System

Composed of three main components—an indoor unit consisting of a coil and a fan, an outdoor compressor unit and a remote control—most ductless heating and cooling units are connected by refrigerant lines and require no ductwork.

Efficient Comfort

Trane’s ductless heating and cooling systems have Seasonal Energy Efficiency Ratings (SEER) up to 22.00, making the systems remarkably efficient and environmentally friendly.

Design Flexibility

Since there is no ductwork to install, it’s easy to add Trane’s reliable heating and ductless heat pump to any home, in any room desired. It’s an economical and efficient option for homes without an existing ducted system or when adding ductwork may be impractical or too expensive.

Zone Control

With a multi-split system, between two and five indoor units—depending on the indoor model—can be connected to just one outdoor unit, providing the exact degree of comfort you require room to room or zone by zone.

^ Back to Top

Trane 4MXX8 Multi-Split Indoor System.

4MXX8

The 4MXX8 indoor multi-split heating and cooling unit works as part of a ductless multi-split system. This ductless product can be mounted near the floor or ceiling and offers high-efficiency heating and cooling for precise comfort with no ductwork.

Ductless System

Composed of three main components—an indoor unit consisting of a coil and a fan, an outdoor compressor unit and a remote control—most ductless multi-split heating and cooling systems are connected by refrigerant lines and require no ductwork. The indoor multi-split heating and cooling unit can be mounted on the wall or in the ceiling.

Efficient Comfort

Trane’s ductless multi-split heating and cooling units have Seasonal Energy Efficiency Ratings (SEER) ranging from 16.00 to 22.00, making the systems remarkably efficient and environmentally friendly.

Quiet Operation

Specially designed air vents efficiently reduce sound to provide quiet comfort as low as 29 dB, for whisper-quiet operation.

Design Flexibility

Since there is no ductwork to install, it’s easy to add Trane’s reliable heating and cooling to any home, in any room desired. It’s an economical and efficient option for homes without an existing ducted system or when adding ductwork may be impractical or too expensive.

^ Back to Top

Trane Slim Duct Unit.

Slim Duct Unit

These compact units are easy to install. Internal drain pumps with check valves are optional. All models offer easy-to-clean filters.

  • Designed for single room applications such as a furr down ceiling, where there is limited space for return and supply air ducting. Return air opening is convertible based on application.
  • Wireless receiver kit available for use with remote controls.
  • Capacity ranges from 7500 BTUH to 48000 BTUH (nominal capacity)

^ Back to Top

Trane 4TXM6 Multi-Split Outdoor System.

4TXM6

Working as part of a ductless heating and cooling system, this outdoor heat pump can be connected to work with two to five ductless heating and cooling units, depending on the model, allowing you to operate each zone independently for room-by-room precise comfort.

Ductless System

Composed of three main components—an indoor unit consisting of a coil and a fan, an outdoor compressor unit and a remote control—most ductless heating and cooling units are connected by refrigerant lines and require no ductwork.

Efficient Comfort

Trane’s ductless heating and cooling systems have Seasonal Energy Efficiency Ratings (SEER) ranging from 16.00 to 22.00, making the systems remarkably efficient and environmentally friendly.

Design Flexibility

Since there is no ductwork to install, it’s easy to add Trane’s reliable heating and ductless heat pump to any home, in any room desired. It’s an economical and efficient option for homes without an existing ducted system or when adding ductwork may be impractical or too expensive.

Zone Control

With a multi-split system, between two and five indoor units—depending on the indoor model—can be connected to just one outdoor unit, providing the exact degree of comfort you require room to room or zone by zone.

^ Back to Top

Trane 4MXF8 Multi-Split Indoor System.

4MXF8

This indoor ductless heating and cooling unit works as part of a ductless multi-split system. This compact, heating and ductless cooling unit’s elegant design offers high-efficiency heating and cooling for precise comfort with no ductwork.

Ductless System

Composed of three main components—an indoor unit consisting of a coil and a fan, an outdoor compressor unit and a remote control—most split heating and ductless cooling systems are connected by refrigerant lines and require no ductwork. The indoor unit can be mounted on the wall or in the ceiling.

Efficient Comfort

Trane’s ductless heating and cooling units have Seasonal Energy Efficiency Ratings (SEER) ranging from 16.00 to 22.00, making the systems remarkably efficient and environmentally friendly.

Quiet Operation

Specially designed air vents in each ductless split cooling and heating unit efficiently reduce sound to provide quiet comfort as low as 29 dB, for whisper-quiet operation.

Design Flexibility

Since there is no ductwork to install, it’s easy to add Trane’s reliable ductless split heating and cooling systemto any home, in any room desired. It’s an economical and efficient option for homes without an existing ducted system or when adding ductwork may be impractical or too expensive.

^ Back to Top

Trane VRF Outdoor Unit.

VRF Outdoor Unit

The 4TVH unit is installed outside and works along with the indoor products to deliver long lasting comfort to the home. This unit is the result of in-depth knowledge and superior technology.

  • R-410A refrigerant
  • Capacity 36-53 MBH
  • Cooling efficiency: up to 18.5 SEER
  • Heating efficiency: up to 9.4 HSPF
  • Variable-speed inverter technology
  • Matched with multiple VRF indoor units
  • Use VRF Select for system validation

^ Back to Top